ISO approved TCCAM-10A -0.36mm wire(Al&Mg alloy wire)
TCCAM is CCAM covered with a layer of tin which featured of the small density of aluminium and the good conductivity of copper.
CCAM adopt the welding and stretch technique that enable the products with high strength, light weight and good conductivity.
CCAM
Copper cladding aluminum magnesium adopt the welding and stretch technique that enable the products with high strength, light weight and good conductivity.
(1)It has overcome the disadvantages of Copper & Aluminum wire ( the diameter is below 1.0mm) with low strength and easily broken.
(2)It has the advantage of:
(a)high tensile strength
(b)small density
(c)low production cost
(d)good shield performance
...
(3)It has two states: Soft and rigid(annealed and unannealed)
(4)We main produce 15%CCAM according to the copper plate.
(5) Its' resistivity is 0.02999ohm. Mm2/m.
(6) Its' nominal density is 3.75g/cm3.
(7) CCAM is widely used in transmission of the television signal, transmission of high capacity communication network, control of the signal cable, the cable of light vehicle, the cable welding, emergency mobile cable, television drive wire, deflecting coil, ballast coil, Automobile wireing Harness, screen shield braid wire, Enameled Wire and so on.
A\In high signal transmission, it is applied to:
A. Standard Material of Conductor in CATV Coaxial Cable
B. 50 Ohm Radio Frequency Aerial
C. Leaky Cable
D. Data Cable
E. Soft Coaxial Radio Frequency Cable
B\In power transmission and LF signal transmission, it can be applied to:
Twisted Pair Power Cable Control Cable Building Cotton Covered Wire Busbar & Other Conductors
C\In special electromagnetic wire, it can be applied to:
A. Coils or windings in computers
B. Mobile communication equipments
C. Spaceflight & aviation and military industry instruments
Key words:
TCCAM, CCA, CCAM, CCS, Coaxial cables, copper clad aluminum&Magnesium, copper clad wires, copper wire, alloy wires